Junips | Waterproof Submersible LED Lamp | IP68 Ingress Protection | Magnetic & Suction Cup Mounting | RF Remote Control (15m Range) | 13 High-Lumen RGB Beads | 360° Illumination for Pools & Aquariums

$67.99 $113.99

Subaquatic Optical Engineering & Ingress Protection

The BowLift Waterproof Magnetic LED Lamp is a high-performance submersible lighting unit engineered for aqueous and terrestrial environmental illumination. Featuring an IP68 protection rating, the unit utilized a reinforced PS (Polystyrene) housing and a clockwise-threaded hermetic seal to prevent liquid ingress at depths up to 2 meters. The optical array consists of 13 high-intensity LED beads, providing 360 lumens of adjustable chromatic output.

BowLift IP68 Waterproof LED Lamp subaquatic performance

Technical Mechanical & Hardware Specifications

RF Remote Control System: Utilizing Radio Frequency technology, the control interface operates at ranges up to 15 meters in open air and 2 meters sub-surface. This improved RF signal penetration bypasses water density and structural obstructions, allowing for synchronized multi-unit management without direct line-of-sight requirements.
Multi-Surface Mounting Array: The chassis is equipped with integrated high-strength magnets for ferrous surfaces and secondary suction cup ports for non-porous substrates such as glass and pool liners. This dual-attachment system ensures stable placement in high-flow environments.
13-LED Chromatic Array: The 13-bead configuration provides 360° light distribution. The internal processor supports 16 static color modes and 6 dynamic transition sequences, with adjustable luminosity thresholds via the IR/RF remote interface.
Anhydrous Internal Compartment: The power supply is isolated within a dry-sealed chamber powered by 3x AA batteries. The 4.5V circuitry is optimized for 50,000 hours of LED life, with an automatic red-light low-battery indicator to signal potential voltage drops.
Industrial PS Housing: The Polystyrene (PS) shell is selected for its high transparency and resistance to chemical swimming pool additives, maintaining optical clarity and structural integrity over extended immersion periods.

Technical Product Data:

Ingress Protection: IP68 (Submersible to 2m)
Luminous Flux: 360 lm
Light Source: 13 High-Lumen LED Beads
Voltage: 4.5V DC
Control Range: 15m (Air) / 2m (Water)
Dimensions: 7 cm x 3 cm
Power Supply: 3x AA Batteries (Not Included)

BowLift LED mounting systems: Magnet and Suction Cups

Hardware Inventory:

1x BowLift Submersible LED Lamp
1x RF/IR Remote Control Unit
Integrated Magnetic & Suction Cup Mounting Hardware

Operational Setup & Maintenance Protocol:

Prior to immersion, ensure the chassis lid is rotated clockwise until the mechanical stop is reached to activate the hermetic seal. For magnetic mounting, verify the surface is free of bio-film or oxidation. For suction cup deployment, apply to a cleaned, non-porous surface. If the unit remains red or unresponsive to color shifts, replace the 3x AA batteries immediately to maintain seal integrity and circuit performance. Remove from water if the unit will be stored for more than 30 days to prevent battery leakage.